Propagation Lights

Mother’s Lil’ Helper 140W LED Grow Light … is just what the name says!

It's 140 Watt full spectrum LED Grow Light. It is a commercial grade fixture designed for years of consistent maintenance free use. Designed to keep your mother plants going strong, for vegetative growth as well as your seedlings and clones. 

Boasting a rugged IP65 rated water resistant heatsink, suitable for wet and humid environments. The Mother’s Lil’ Helper comes with 90-degree reflectors for better light distribution. The light is guaranteed to maintain 90% or better light output for 3 YEARS with regular use.

*No other company guarantees the light output degradation.

Specs:

• Input Voltage – 110V – 277V 
• Frequency Range – 50~60Hz

• Power Consumption – 140W
• Amperage Draw – (.@ 120V 1.17A, @ 240V 0.58A, @ 277V  0.51A)

• Ideal Replacement – 250W HPS Fixture
• Lumens – 12,000
• BTU – 478
• CCT - 4905
• LUX - 49877
• PPFD - 761.0 @1ft
• PPFD - 370.7 @18"

• Light Beam Angle – 120 Degree
• Body Lens – Glass
• Body Case Material – Die Cast Aluminum
• Product Size –10″W x 6"H 

• Net Weight – 10.4 lbs ( 4.7Kg )

LED lighting for growth is designed for small growing areas with a surface up to approx. 0.8m2 and low drainage. Thanks to the low calorific value, you can place the TLED 26W directly above the plants without the risk of burns. In larger areas, they can be used as an additional source for places that do not get enough light from MH lamps.

26W TLED parameters to grow:

• Dimensions: 54x4x3cm
• Weight: 0.36kg
• Cable length: 240cm
• Frequency: 50 / 60Hz
• Consumption: 26W
• Lifetime: 30,000 hours
• Luminous flux: 2050lm
• Power: 80lm / W
• Chromaticity temperature 6500K

The best high output fluorescent fixtures to hit the market. Extremely high lumens per watt and ideal for all growing situations; from propagation to vegetative growth, and even for flowering.

• powder coated hosing with hammer tone reflector 
• plugs directly into standard power socket - no external ballast required
• easy mounting
• extremely power efficient (high lumen to watts ratio)
• available in two models 2 x 55, or 4 x 55

The best high output fluorescent fixtures to hit the market. Extremely high lumens per watt and ideal for all growing situations; from propagation to vegetative growth, and even for flowering.

• powder coated hosing with hammer tone reflector 
• plugs directly into standard power socket - no external ballast required
• easy mounting
• extremely power efficient (high lumen to watts ratio)
• available in two models 2 x 55, or 4 x 55

This is the module kit to increase the number of lights on a PS1 Light Kit.

 The PS1 add on lighting system is ideal for propagation of seeds and cuttings, as well as microgreens. This is an add on extender for existing PS1 lighting systems.

The PS1 light system is a T5 Fluro system that allows you to add lights as needed. The basic kit is 2 lights. You can add an extra 1 or 2 light units to this to make a 3 or 4 unit. You can add more units up to 8 bars, but you will need the long (wide) spines

The PS-1 light kit comes with 2 light fittings each fitting holds one high output fluoro with its own highly efficient reflector. The PS-1 Light kit is very simple and easy to set up it plugs straight into the wall - the spines clip perfectly onto the frame of propagation clone tents.

• Available in a 8500K lamp (purple) for propagation and growth and a 6400K lamp (white) for general growth

These Click and Lock spines allow you to convert your 4 lamp PS-1 Light Kit to a 8 lamp kit!