(03) 9570 8213
34 products
34 products
Hydro Halo Water Feed Ring - 6"/9"/12" Sizes | 13MM Fitting | 2 Pack
Regular price $20.00
Tax included.
Hydro Halo Water Feed Ring
- More effective irrigation of all types of pots/containers in all growing mediums.
- Drip emitters and stakes only provide a single point of irrigation making it hard for water/nutrient solution to evenly saturate a container. HYDRO HALO has 54 perfectly positioned pores to evenly irrigate containers eliminating dry pockets of growing medium.
- Kit contains 3 removable stakes to keep water rings in place around each plant. The HYDRO HALO can also be used without the stakes if desired.
- The water ring has a 1 inch gap on one end to allow it to be placed around large plants without damaging the stalks.
- Can be used indoors or outdoors in soil or hydroponics.
- Durable construction allows for years of use.
- Can be easily cleaned between growing cycles.
- Create your own flexible irrigation kits easily and cheaply with any 13mm ( inch) I.D. tubing and 13mm ( inch) fittings (not included). Please note that adding 13mm ( inch) ball valves may be necessary to create an even flow to all water rings in large installations.
NEW SUPER FLOW SYSTEM, larger holes for maximum irrigation
Black Super Soft Tube Irrigation Fitting Hose - PER METRE LENGTHS | 4MM / 6MM / 13MM / 19MM / 25MM Hydroponics | Flexible Pipe
Regular price $0.80
Tax included.
This superior quality, soft, black, high density tubing is by far the best on the market for hydroponics.
When comparing tubing, check the wall thickness. Our tubing is thicker than most, allowing tighter bends, and reducing the chances of blockages greatly.
Black Super Soft Tube Irrigation Fitting Hose - 10M Rolls |13MM / 19MM / 25MM Hydroponics | Flexible Pipe
Regular price $30.00
Tax included.
This superior quality, soft, black, high density tubing is by far the best on the market for hydroponics.
When comparing tubing, check the wall thickness. Our tubing is thicker than most, allowing tighter bends, and reducing the chances of blockages greatly.
Black Super Soft Tube Irrigation Fitting Hose - 30M Rolls |13MM / 19MM / 25MM Hydroponics | Flexible Pipe
Regular price $45.00
Tax included.
This superior quality, soft, black, high density tubing is by far the best on the market for hydroponics.
When comparing tubing, check the wall thickness. Our tubing is thicker than most, allowing tighter bends, and reducing the chances of blockages greatly.
Aqua One Soft Air Hose | 4mm | Airline Tubing Clear | $0.48 Per Meter
Regular price $0.48
Tax included.
Aqua One 4mm Airline soft tubing is more flexible and therefore remains kink resistant for longer periods of time. It fits the standard air pump outlet of 4mm. Also easily used with check valves
Suitable to be used with:
- Air operated ornaments
- Air driven Sponge filters
- Air stones and air curtains
- Air driven Egg Tumblers
FloraFlex Matrix Circulator - 75MM | Top Feeding | Water Ring
Regular price $2.00
Tax included.
The FloraFlex® Matrix Pad is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. It can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.
Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Matrix Wicking Pad.
The Matrix Pad is a lightweight Non-Woven Capillary Mat placed between the Matrix and the medium. Traditionally capillary pads are placed underneath plants, however FloraFlex has designed the Matrix Pad to absorb water and wick to the top of the medium, delivering water and nutrients evenly.
Choose your Matrix Pad by your pot’s diameter:
- 10.5”
- 12.5”
- 15.5”
Place the Matrix Pad on the surface of your plant, the Matrix Unit on top of it, press down, press the Circulator into the center holes, and connect your 1/4” OD tubing to the Circulator. Now let your plants enjoy the benefits of a Top Feeding Wicking System.
FloraFlex Water Tubing - 4MM | $0.90 Per Metre | Food Grade Hose | Hydroponic | Aquaponics
Regular price $0.90
Tax included.
Color coordinate with your premium vinyl - food grade hose from FloraFlex™. Perfect for hydroponic systems, aquaponics, irrigation, aquaculture and more! Durable and designed for horticultural application, the FloraFlex tubing will make your irrigation look clean and perform to potential!
- FloraFlex™ green
- FloraFlex™ logo printed on the tubing
- 100 feet in length (30m)
- Outer Diameter: 1/4"
- Inner Diameter: 3/16"
FloraFlex Matrix System - 10.5" 12.5" 15.5" | Top Feeding Wicking System | Pads & Maze Circulators
Regular price $8.75
Tax included.
The FloraFlex® Matrix Pad is part of the Matrix System, a patent pending first of its kind Top Feeding Wicking System that provides the most even way to deliver water and nutrients to your plants. It can be used with pots ranging from 7.5”-18” Diameters. You will need a Matrix unit, the same size Matrix Pad, and the correlating Matrix Circulator.
Water and nutrients travel into the Circulator, hit the slope of the Matrix and are pushed outward into eight maze sections that have individual holes dripping the water and nutrients onto the Matrix Wicking Pad.
The Matrix Pad is a lightweight Non-Woven Capillary Mat placed between the Matrix and the medium. Traditionally capillary pads are placed underneath plants, however FloraFlex has designed the Matrix Pad to absorb water and wick to the top of the medium, delivering water and nutrients evenly.
Choose your Matrix Pad by your pot’s diameter:
- 10.5”
- 12.5”
- 15.5”
Place the Matrix Pad on the surface of your plant, the Matrix Unit on top of it, press down, press the Circulator into the center holes, and connect your 1/4” OD tubing to the Circulator. Now let your plants enjoy the benefits of a Top Feeding Wicking System.
FloraFlex Rocket Drippers - Piercing | 4MM | 15L/Hour | Short or Long
Regular price $2.00
Tax included.
The 3” Short Rocket Drippers have rocket wings to add to the stability inside of the media. As stand-alone drippers, they can be used inside, outside, and with the Drip Shields. The piercing feature allows you to connect the drippers directly into a larger hose, eliminating the need for a 1/4” hose or extra steps ordinarily taken from pump to plant.
Deliver water and nutrients straight to the root zone of your plants with the subsurface design, which allows the drops to fall 3/4” below the surface and dispense out of the three slots at its bottom.
- Eliminates Algae & use of Pesticides by keeping the top of the media dry.
- 1/4” barbed nozzle.
- 1 GPH (or 2 - 4 GPH) / 10 - 50 PSI.
- Self-Cleaning, pressure compensating torturous path.
- Color coded for easy recognition.
- Snap & Pop Technology
- Reusable.
- BPA & Lead Free rubber & plastic.
The 6” Long Rocket Drippers have rocket wings to add to the stability inside of the media and are great for indoor or outdoor use. The piercing feature allows you to connect the drippers directly into a larger hose, eliminating the need for a 1/4” hose or extra steps ordinarily taken from pump to plant.
Deliver water and nutrients straight to the root zone of your plants with the subsurface design, which allows the drops to fall 1 1/4” below the surface and dispense out of the three slots at its bottom.
Eliminates algae and use of pesticides by keeping the top of the media dry.
- 1/4” barbed nozzle.
- 4 GPH (or 1 - 2 GPH) / 10 - 50 PSI.
- Self-Cleaning, pressure compensating torturous path.
- Color coded for easy recognition.
- Snap & Pop Technology
- Reusable.
- BPA & Lead Free rubber & plastic.
FloraFlex FloraCap - 100MM (4" Inch) | Built-in Over Flow System | Reusable
Regular price $5.50
Tax included.
Place the revolutionary FloraCaps™ on your 4” Rockwool cubes and maximize your space in the vegetative cycle. 17 flower-designed louvers block light while allowing air, water, and nutrients to your plants.
The FloraCap™ was designed with the vegetative state in mind but has proven a worthy tool for the avid top feeder throughout the flowering stage as well. Eliminates algae and the use of pesticides by covering the media.
- 17 flower-designed louvers.
- Built-in overflow system where excess water and nutrients are delivered straight to the rootball.
- 360° bottom lip directs all water and nutrients to your plant.
- Four three-way stakes on the bottom for extra stability.
- Holes in all four corners for leftover water drainage.
- Stackable.
- Reusable.
- BPA and lead-free plastic.
FloraFlex FloraClips - For 4MM Hose | Hydroponic | Water Control
Regular price $0.65
Tax included.
FloraFlex are bringing you the the best accessories for hydroponic connoisseurs. Designed to maximise irrigation efficiency and water control, they can take your cultivation to the next level! Place the revolutionary FloraCaps™ on your 6” Rockwool cubes and maximize your space in the vegetative cycle.
The FloraCap™ was designed with the vegetative state in mind but has proven a worthy tool for the avid top feeder throughout the flowering stage as well.
Place the revolutionary FloraCaps™ on your 6” Rockwool cubes and maximize your space in the vegetative cycle. 34 flower-designed louvers block light while allowing air, water, and nutrients to your plants.
The FloraCap™ was designed with the vegetative state in mind but has proven a worthy tool for the avid top feeder throughout the flowering stage as well.
Eliminates algae and the use of pesticides by covering the media.
- 34 flower-designed louvers.
- Built-in overflow system where excess water and nutrients are delivered straight to the rootball.
- 360° bottom lip directs all water and nutrients to your plant.
- Four three-way stakes on the bottom for extra stability.
- Holes in all four corners for leftover water drainage.
- Stackable.
- Reusable.
- BPA and lead-free plastic.
FloraFlex Barbed Tee - 4MM | Top Feeding Wicking System
Regular price $0.50
Tax included.
The Floraflex Barbed Tee (100 pack) is the newest product from Floraflex! Using a 'Barbed Tee' allows for control and adaption of hydroponic irrigation setups. Perfect for hydroponics, aquaponics, aquaculture and more, the barbed tee is designed for durability.
- Made for 4mm (1/4") hose.
- 100 pack
- Designed in the USA
- BPA Free
- Lead Free
Barbed Tee | 4MM / 6MM / 13MM / 19MM /25MM | Hydroponic Plumbing Bits
Regular price $0.40
Tax included.
For adapting to different hose/pipe sizes.
Barbed Increasing Tee | 13MM - 19MM | 19MM - 25MM | Hydroponic Plumbing Bits
Regular price $1.30
Tax included.
For adapting to different hose/pipe sizes.
Barbed Reducing Tee | 13MM - 4MM | 13MM - 6MM | 13MM - 19MM | 25MM - 13MM | Hydroponic Plumbing Bits
Regular price $2.20
Tax included.
For adapting to different hose/pipe sizes.
Barbed Cross Piece Joiner | 13MM / 19MM /25MM | Hydroponic Plumbing Bits
Regular price $1.20
Tax included.
These are used to branch tubes into four directions.
Barbed Elbow | 4MM / 6MM / 13MM / 19MM /25MM | Hydroponic Plumbing Bits
Regular price $0.40
Tax included.
Elbows simply provide a bend in the pipe for easy installation around corners. This ensures that you don't kink the pipes.
Barbed Joiner | 13MM / 19MM /25MM | Hydroponic Plumbing Bits
Regular price $0.40
Tax included.
For joining pieces of poly pipe.
Barbed Reducing Joiner | 13MM / 19MM /25MM | Hydroponic Plumbing Bits
Regular price $0.50
Tax included.
- For adapting to different hose/pipe sizes.
Nut & Tail x 3/4" BSP Nut - 13MM /19MM | Hydroponic Plumbing Bits
Regular price $1.60
Tax included.
These are commonly used to connect to a threaded pressure pipe fitting, tank outlet, or valve. They provide a seal at the end of a male BSP threaded fitting.
Barbed End Plug | 13MM / 19MM /25MM | Hydroponic Plumbing Bits
Regular price $0.40
Tax included.
These are used to plug the end of any PVC or Poly pipes. Easy grip ends on 13MM, 19MM and 25MM plugs.
Top Hat Grommet -6MM / 8MM / 13MM / 19MM / 25MM | Joiner | Hydroponic Plumbing Bits
Regular price $0.50
Tax included.
Grommets are an important component in any hydroponic system. use these grommets when building a new system or to replace old, cracking grommets on an existing system.
Barbed Tap Inline Water Valve | 4MM / 6MM / 13MM / 19MM /25MM | Hydroponic Plumbing Bits
Regular price $1.50
Tax included.
A range of polypropylene fittings designed to control, disperse, slow and divert water through a low-pressure irrigation system. Used in conjunction with low-pressure poly tubing.
Poly Pipe Fitting Ratchet Clip - 13MM / 19MM / 25MM | Lockable Clamps | Hydroponic Plumbing Bits
Regular price $0.20
Tax included.
Use these Poly Ratchet Clamps to secure the connection of Poly Fittings. These are absolutely necessary to prevent blowouts. If you are finding your ratchet clamps aren't doing the job on your drip system the problem 99% of the time is that there is no pressure reducer fitted on the system. These ratchet clamps are designed to work on drip & spray systems and will if the system is designed & installed properly. The Poly fittings we offer are high quality Antelco fittings made especially for Low-Density Poly and Drip Tube.
- Negative rake teeth for a firm grip
- Suits 13MM / 19MM / 25MM poly tubing
- UV stabilised material
- Material: Polypropylene
- Colour: Black
- Size: 13MM, 19MM, 25MM
Tub Outlet Extension
Regular price $3.00
Tax included.
The Tub Outlet Extension is a handy addition when using the Tub Outlet in the bottom of a reservoir. By pressing the extension into the outlet, and then pressing on the Screen, you can adjust the level the reservoir can drain down to. You can add as many extensions as you want.
Tub Outlet Screen
Regular price $3.87
Tax included.
Tub Outlet Screen can be used to fit from 13mm to 25mm tub outlet nut & washer to make sure your hydroponic medium don’t go back to your nutrient tank.
Repair Plug | Hydroponic Plumbing Bits
Regular price $0.10
Tax included.
Plug 4MM Holes in Soft Poly Tubing.
Barbed Compact In-Line Water Filter - 13MM 19MM | Hydroponic Plumbing Bits
Regular price $5.00
Tax included.
Inline Filter
The In-Line Barbed Filter stops the dirt and grit from dirty water entering the irrigation system and blocking drippers and sprayers. It can be secured with locking clamps, requires simple maintenance and can be situated anywhere on line, ideally before drippers. In-Line Barbed Filters are UV stabilised for long lasting durability and performance in harsh Australian outdoor conditions.
Autopot | 13mm / 4mm | Inline Filter | For AutoPot System
Regular price $13.80
Tax included.
Compact water filter with a cage to catch debris and protect hose and dripper nozzles. These filters are a newer version of the long inline water filters.
Clean by unscrewing the filter ends and rinsing the white cage inside. They have barbed connections on each end.
An arrow points to the direction of flow of water, and our Black Flexible Tubing or Garden poly connects to the barbed ends - no clamps required.
A filter with a removable mesh inner for cleaning. This filter has 13mm connections PLUS an additional 4mm screw on adaptors that convert the filter to a 4mm filter. You can use this as a 13mm filter, 4mm filter or as a reducing fitting (13mm tubing or grommet filtered down to a 4mm outlet). The 4mm barbs feature the white screw-on caps which lock the tubing in place.
Apex Float Valve - Space Saver | Adjustable | 19MM Fitting | Hydroponic Plumbing Bits
Regular price $45.00
Tax included.
Float Valve – Space Saver
The use of float valves in hydroponics nutrient reservoirs ensures a constant level of nutrient can be maintained, and the hydroponic system is less likely to run dry.
A float valve is usually installed into the main nutrient reservoir and connected to a ‘header’ tank with backup nutrient (or just plain water). As the main nutrient reservoir level drops, fresh supplies are feed (usually by gravity) into the main reservoir.
The float valves below can even be connected to mains water.
Dimensions:
- valve length is approximately 300mm.
- float – 135mm (L) x 50mm x 40mm
Float Valve - Compact | Adjustable | 13MM Fitting | Hydroponic Plumbing Bits
Regular price $25.00
Tax included.
Compact Float Valve with adjustable float.
The float level can easily be adjusted by loosening the adjustment nut and altering the angle of the float.
-
valve & float length is approximately 240mm
-
Inlet: 13mm barbed fitting
The use of float valves in hydroponics nutrient reservoirs ensures a constant level of nutrient can be maintained, and the hydroponic system is less likely to run dry.
A float valve is usually installed into the main nutrient reservoir, and connected to a 'header' tank with backup nutrient (or just plain water). As the main nutrient reservoir level drops, fresh supplies are feed (usually by gravity) into the main reservoir.
The float valves below can even be connected to mains water.
Aqua One Airline Check Valve (2 Pack)
Regular price $4.00
Tax included.
Connect a check (one-way) valve to air line tubing to prevent water back-siphoning down your air line when there is a power outage. Back-siphoning is extremely dangerous and can ruin your air pump, empty your aquarium, damage your floors and create a shock hazard.
- Small and Compact
- Fits standard aquarium air line 4mm inner diameter
- Allows air to travel in one direction only.
- Stops water coming back down the air tube
- Easy to install - just cut the airline between the air stone and the air pump and insert check valve into air line
Ensure a check Valve is used whenever an air pump is positioned at or below the waterline of the aquarium to prevent back-siphoning.
Micro Sprayer - Half & Full Circle | 180 Degree | 360 Degree
Regular price $0.25
Tax included.
- High precision machining, anti-aging, high temperature resistance.
- It not easily deformed, reliable operation and long service life.
- It can be used to replace damaged various spray head straight.
- Used for DIY hydroponic / aeroponic / cloning machine syetem.
- You can just connection the PVC / PPR /PE pipes.
Punch Spanner - 4MM Holes | To Puncture Soft Poly Hose | Hydroponic Plumbing Bits
Regular price $0.75
Tax included.
Used to puncture holes in soft poly tubing.