Lamps

Plants require different types of light at different times during their growing cycle.

To maximise the potential of a plant and to ensure it grows strong and healthy, it is essential to provide the right kind of light at the right time.

The Sunmaster Dual Spectrum Lamp has been scientifically developed to deliver improved blue and red light to your plants at the crucial stages in their development.

• Produces higher chlorophyll levels for healthier plants
• Produces thicker primary stems
• Promotes larger leaf area / mass
• Encourages early flowering
• Inhibits unnatural stem elongation
• Produces higher yields
• Encourages increased numbers of plant inter-node

This Philips lamp is a PLUS - the AGRO bulbs have extra blue and the PLUS lamps do not. This lamp is popular with some growers as the lamp output is very high and this can give a high flowering yield.

Because of the lack of added blues that most HPS agricultural spectrums have, this lamp would usually be used during flowering only. However, it can be used with vegetative growth if desired but note that in some cases stretching can occur with this lamp.

SON T PLUS 600W HPS LAMP This high pressure sodium lamp from Philips is particularly suitable for the flowering stage of plants. The lamp is made of tempered glass containing a discharge tube and a measured amount of sodium. Characteristics of the lamp: Suitable for the flowering stage 89,000 lumens brightness E40 socket

This is the module kit to increase the number of lights on a PS1 Light Kit.

 The PS1 add on lighting system is ideal for propagation of seeds and cuttings, as well as microgreens. This is an add on extender for existing PS1 lighting systems.

The PS1 light system is a T5 Fluro system that allows you to add lights as needed. The basic kit is 2 lights. You can add an extra 1 or 2 light units to this to make a 3 or 4 unit. You can add more units up to 8 bars, but you will need the long (wide) spines

The PS-1 light kit comes with 2 light fittings each fitting holds one high output fluoro with its own highly efficient reflector. The PS-1 Light kit is very simple and easy to set up it plugs straight into the wall - the spines clip perfectly onto the frame of propagation clone tents.

• Available in a 8500K lamp (purple) for propagation and growth and a 6400K lamp (white) for general growth

130W 6400K Colour Temperature Compact Fluorescent Lamp with integrated ballast. E40 screw fitting. Minimal heat generation.

Common Uses;

• Supplementary Lighting
• Over wintering plants
• Side Lighting
• Mother plants
• Propagation

Powerplant CFL Grow Light Colour Temperatures:

• 6400K (White) - For propagation and growth.
  
• 2700K (Red) - For flowering and fruiting.

LED lighting for growth is designed for small growing areas with a surface up to approx. 0.8m2 and low drainage. Thanks to the low calorific value, you can place the TLED 26W directly above the plants without the risk of burns. In larger areas, they can be used as an additional source for places that do not get enough light from MH lamps.

26W TLED parameters to grow:

• Dimensions: 54x4x3cm
• Weight: 0.36kg
• Cable length: 240cm
• Frequency: 50 / 60Hz
• Consumption: 26W
• Lifetime: 30,000 hours
• Luminous flux: 2050lm
• Power: 80lm / W
• Chromaticity temperature 6500K

Plants require different types of light at different times during their growing cycle.

To maximise the potential of a plant and to ensure it grows strong and healthy, it is essential to provide the right kind of light at the right time.

• Produces higher chlorophyll levels for healthier plants
• Produces thicker primary stems
• Promotes larger leaf area / mass
• Encourages early flowering
• Inhibits unnatural stem elongation
• Produces higher yields
• Encourages increased numbers of plant inter-nodes

Digi-Lumen light kits are the most affordable complete electronic light
kit (ballast, lamp and reflector) yet seen in Australia. The kits include a
4D dimmable ballasts are the latest generation of digital ballasts. Clever
engineering makes for cost effective and electrically stable ballasts that are
suitable for harsh conditions and high voltage power grids. Digi-Lumen
light kits come with the ability to change the power output to four unique
settings. This offers a complete plant lighting solution from one light kit
including ‘Seed & Clone Mode’ (250 W), ‘Vegetative and Power Save Mode’
(400 W), ‘Flower Mode’ (600 W) and ‘Super-Lumens Mode’ for extreme
flowering on cooler days (660 W).

GE Lucalox XO lamps combine long life and excellent luminous efficacy to deliver low operating costs and energy efficient performance.

The newest Generation of Horticultural lamps designed specifically for Greenhouses and indoor horticulture.

Powerplant lamps are tailored to promote, optimum development at each plant growth stage. The powerplant arc tube, dosing technology achieves more usable light energy without sacrificing, the intensity or lamp life. Benefits, of powerplant lamps:, - efficiency " powerplant lamps provide more lumens per watt than other, lamps. - flexible retrofit " both powerplant hps and powerplant mh are, designed to run on the same control gear. - safety " no over-running of the lamp, these lamps are specifically, designed to run on the one set of hps gear as supplied in powerplant, ballasts. - cost effective

Ceramic metal halide 1000W lamps from Nanolux comes in both a 3K and 4K horticultural spectrum. Ceramic Metal Halide is different from your standard metal halide and HPS lamps.

CMH lamps produce a much broader spectrum of light. This broad spectrum allows the plant to absorb more usable light, giving the plant a more natural morphology usually only found in Sun grown plants. Not only is there a more balanced PAR, CMH technology incorporates spectral wavelengths not found inside the PAR range, yet still helpful with increasing the quality of the plant.

The added UV increases essential oil production, increases colour expression, and shortens internodal spacing. While the added IR in the far red end of the spectrum increases the metabolism of the plant, thereby encouraging more aggressive growth. With the CMH 1000W lamp, this technology can now be fully utilized as a standalone lighting source.

Our CMH 1000W fixtures are designed for commercial use and are suitable for vegetative and flowering purposes. The lamps are only intended for use in the Nanolux low frequency CMH ballast. The use of ultra-high frequency DE ballasts should be avoided.

The Lumatek 400V lamp has been engineered for use with Lumatek 600W 400V electronic ballast and is produced using high-grade ceramic arc tube technology and specific horticultural gas blend that creates optimal spectral output for healthy plant growth. 

400 Volt HPS lamps are more efficient than standard HPS lamps and this allows them to have a 10% increase in light intensity and PAR/PPF output. 

The PCA ceramic arc tube permits the lamp to operate at higher internal temperatures increasing colour rendering, output and efficiency. PCA resists interaction with the chemicals inside the tube which stabilizes the chemical mix over the life of the lamp, thereby improving colour consistency and PAR/PPF level maintenance. Pulse-start technology enables faster start up & restrike time, longer lamp life and increased lumen maintenance.

Cultiv8 E40 Adaptor – Suitable for CMH/CDM/LEC lamps

An easy to fit E40 to CMH/CDM/LEC lamp adaptor. By simply screwing the adaptor into your preferred reflector, changing the E40 screw to a CMH/CDM/LEC 2 pin fitting for use with CDM/CMH 315w lamps with PGZX18 Base.