Flairform: Additives

Humic acid and fulvic acid additives are known to increase the cation exchange capacity (CEC) of soils and act as a “chelator” to aid nutrient uptake. They also help enhance root development, improve the water holding capacity of soils and promote the growth of beneficial bacteria. Humic acid (HA) is derived from leonardite, a coal like material formed via the decomposition of plant matter.

Fulvic acid (FA) is the fraction of humic acid that is soluble in water under all pH conditions. Fulvic acid is regarded for providing superior efficacy than humic acids.
'Kelp' is derived from the soluble ‘extract’ of seaweed species such as Ascophyllum Nodosum and Laminaria. The extract is widely regarded to act as a soil conditioner that increases the cation exchange capacity (CEC) of soils, assists nutrient uptake and promote the growth of beneficial bacteria.

GroStorm includes kelp, fulvic & humic acid, plus natural vitamins.  Most brands ‘package’ these elements in over 3 or more bottles:

• Promotes plant vitality, yield & quality
• Maximizes Brix levels, oils & taste
• Increases resistance to heat stress
• Highly stable and fully soluble (no blockages)
• Use during vegetative & flowering
• For use in hydroponics, soil or coco
• Dose rate 2.5ml/L (9.5ml/Gal)
• Available in 250ml, 1L, 5L and 20L
• Technical: Click here to view product labels, feed charts, brochures and MSDS

STEP 1. Dosing

• Fill the nutrient reservoir with low EC water then add GREEN DREAM ‘A’ followed by GREEN DREAM ‘B’ then the additives. Add in the sequence shown in the chart (left to right) and stir thoroughly after each addition. Never pre-mix nutrients and additives in concentrated form. Pre-dilute SILIKAMAJIC 10-fold with plain water before adding to the reservoir. ^BUDGENIE: For increased weight use up to 5ml/L for heavy feeders (yields “Final EC” 2.25mS/cm).

STEP 2. pH Control

• Check pH is between 5.0 and 6.5 (below 6.0 may enhance nutrient uptake).

STEP 3. Feed frequency

• Generally use this nutrient solution with each watering.

STEP 4. Maintenance

• Maintain nutrient temperature between 68-77 deg F (20-25 deg C). Cover the reservoir to prevent evaporation and exposure to light.
• ‘Recirculating' hydroponic systems: Maintain pH as in Step 2. Keep reservoir topped up with water. Do not allow EC to fall more than 0.3mS (maintain by adding GreenDream A and B). Discard, flush, and replace the nutrient solution every 7-10 days.
• Coco Coir or Soil systems: Flush the medium every 1-2 weeks with plain water.
•  Apply Pythoff for root problems such as root browning or fungus gnat infestations

SPECIFICATIONS

• When to Use: Veg and bloom phase
• Dosage:  2.5ml/L (9.5ml/Gal)
• Substrates: Hydro / Coco / Soil
• Bottle Sizes: 1L, 5L, 20L

The deficiency of calcium (Ca), magnesium (Mg) and iron (Fe) can cause common symptoms such as blossom-end-rot (death of the end part of fruit), upward leaf curl, withered flower/fruit set, interveinal chlorosis and the death of terminal buds and root tips. If the above mentioned symptoms are present, be sure to check pH and humidity levels. Excessive pH can cause both calcium and iron to become insoluble. Excessive humidity restricts the distribution (“translocation”) of nutrients throughout the plant and is a common cause of calcium deficiency. Avoid using this additive with excessively hard make-up water because it can exacerbate the build-up of white "scale". This can result in dripper blockage and a reduction in the amount of available sulfate - an essential plant nutrient.

CMX is a cal-mag additive used for preventing nutrient deficiency symptoms.  Unlike other brands, CMX also contains all trace elements (Fe, Cu, Mn, Zn, Mo, B).  Did you know most deficiency symptoms are due to trace element deficiencies?

Deficiency symptoms are all too common in growing systems that contain heavy feeders or suffer from lack of maintenance or poor quality waters.  CMX protects plants against problems such as:

• Blossom-end-rot
• Upward leaf curl
• Withered flower/fruit set
• Interveinal chlorosis
• Stunted growth rates

CMX contains 6% calcium, 2% magnesium, 0.2% iron EDDHA (NPK 4-0-0), and all essential trace elements (copper, zinc, and manganese as EDTA, molybdenum, and boron).

• Use during vegetative & flowering 
• For use in hydroponics, soil, or coco
• Dose rate 0.5-1ml/L (2-4ml/Gal)
• Available in 250ml, 1L, 5L, and 20L

STEP 1. Dosing

• Fill the nutrient reservoir with low EC water then add GREEN DREAM ‘A’ followed by GREEN DREAM ‘B’ then the additives. Add in the sequence shown in the chart (left to right) and stir thoroughly after each addition. Never pre-mix nutrients and additives in concentrated form. Pre-dilute SILIKAMAJIC 10-fold with plain water before adding to the reservoir. *BUDGENIE: For increased weight use up to 5ml/L for heavy feeders (yields “Final EC” 2.25mS/cm).

STEP 2. pH Control

• Check pH is between 5.0 and 6.5 (below 6.0 may enhance nutrient uptake).

STEP 3. Feed frequency

• Generally use this nutrient solution with each watering.

STEP 4. Maintenance

• Maintain nutrient temperature between 68-77 deg F (20-25 deg C). Cover the reservoir to prevent evaporation and exposure to light.
• ‘Recirculating' hydroponic systems: Maintain pH as in Step 2. Keep reservoir topped up with water. Do not allow EC to fall more than 0.3mS (maintain by adding GreenDream A and B). Discard, flush, and replace the nutrient solution every 7-10 days.
• Coco Coir or Soil systems: Flush the medium every 1-2 weeks with plain water.
•  Apply Pythoff for root problems such as root browning or fungus gnat infestations

Root rot is every hydroponic grower’s nightmare and can destroy an entire system in a matter of days. Pythoff is designed to combat root rot by preventing it in the first place. It can be used as a treatment for the very early stages, but as root rot can quickly cause havoc in your system we always recommend that it’s better to use this as a sterilising agent from the start.

Pythoff will sterilise anything it comes into contact with which means all drippers, reservoirs, and surfaces in your hydroponic system will be sterilised and protected from pathogens that affect hydroponic systems. Highly recommend to all hydroponic growers as Pythoff can be used safely in all hydro systems.

Key features of Pythoff include:

• Sterilising agent suitable for all hydroponic systems
• Can treat root rot if caught early enough
• If used regularly will remain active through entire growth cycle
• Suitable for use from seedling to harvest
• Protects and prevents plants from harmful pathogens

BUDSTORM

• PK additives primarily contain phosphate (“P”) and potassium (“K”). These elements are essential during the flowering and fruiting phase. Although bloom nutrients contain phosphorus and potassium, heavy fruiting plants such as tomatoes and peppers have an especially high demand for these elements. Hence, PK additives are used in conjunction with bloom nutrients to help ensure no deficiencies occur. They are also a more economical alternative compared to using extra bloom nutrient.
  PK additives should generally be used from the onset of budding until flowers or fruit are fully formed.
  When choosing a PK additive choose a brand that is relatively pH 'neutral'. Many brands are quite ‘alkaline’ which causes a significant increase in nutrient solution pH. These can quickly destabilize the nutrient if pH is not adjusted immediately after dosing.)

BudStorm is an All-in-One flowering additive for promoting floral blooms of optimum size and quality:

• Contains phosphorus, potassium (NPK 0-12-11) and organic flowering stimulants
• Improves the integrity of flowering sites
• pH “neutral” formulation
• For use in hydroponics, soil or coco
• Dose rate 1ml/L (4ml/Gal)
• Available in 250ml, 1L, 5L and 20L

STEP 1. Dosing

• Fill the nutrient reservoir with low EC water then add GREEN DREAM ‘A’ followed by GREEN DREAM ‘B’ then the additives. Add in the sequence shown in the chart (left to right) and stir thoroughly after each addition. Never pre-mix nutrients and additives in concentrated form. Pre-dilute SILIKAMAJIC 10-fold with plain water before adding to the reservoir. ^BUDGENIE: For increased weight use up to 5ml/L for heavy feeders (yields “Final EC” 2.25mS/cm).

STEP 2. pH Control

• Check pH is between 5.0 and 6.5 (below 6.0 may enhance nutrient uptake).

STEP 3. Feed frequency

• Generally use this nutrient solution with each watering.

STEP 4. Maintenance

• Maintain nutrient temperature between 68-77 deg F (20-25 deg C). Cover the reservoir to prevent evaporation and exposure to light.
• ‘Recirculating' hydroponic systems: Maintain pH as in Step 2. Keep reservoir topped up with water. Do not allow EC to fall more than 0.3mS (maintain by adding GreenDream A and B). Discard, flush, and replace the nutrient solution every 7-10 days.
• Coco Coir or Soil systems: Flush the medium every 1-2 weeks with plain water.
•  Apply Pythoff for root problems such as root browning or fungus gnat infestations

SPECIFICATIONS

• When to Use: Bloom phase
• Dosage:  1ml/L (4ml/Gal)
• Substrates: Hydro / Coco / Soil
• Bottle Sizes: 1L, 5L, 20L

Successful growers are well aware that a large and healthy root mass is fundamental for delivering consistently high yields. Flairform Roots has a unique ability to deliver a thicker, denser root mat with the notable outcome of “transition-less” growth and faster crop speed. Impressively, this has been achieved without incorporating toxic PGR’s, or substances that create a horrible mess in the growing system.

For maximizing crop speed and helping prevent transplant stress:

• Helps promote explosive root growth.
• For use throughout the seedling phase, veg and bloom.
• For use in hydroponics, soil or coco
• Dose rate 1.5ml/L (5.5ml/Gal)
• Available in 250ml, 1L, 5L and 20L

STEP 1. Dosing

• Fill the nutrient reservoir with low EC water then add GREEN DREAM ‘A’ followed by GREEN DREAM ‘B’ then the additives. Add in the sequence shown in the chart (left to right) and stir thoroughly after each addition. Never pre-mix nutrients and additives in concentrated form. Pre-dilute SILIKAMAJIC 10-fold with plain water before adding to the reservoir. *BUDGENIE: For increased weight use up to 5ml/L for heavy feeders (yields “Final EC” 2.25mS/cm).

STEP 2. pH Control

• Check pH is between 5.0 and 6.5 (below 6.0 may enhance nutrient uptake).

STEP 3. Feed frequency

• Generally use this nutrient solution with each watering.

STEP 4. Maintenance

• Maintain nutrient temperature between 68-77 deg F (20-25 deg C). Cover the reservoir to prevent evaporation and exposure to light.
• ‘Recirculating' hydroponic systems: Maintain pH as in Step 2. Keep reservoir topped up with water. Do not allow EC to fall more than 0.3mS (maintain by adding GreenDream A and B). Discard, flush, and replace the nutrient solution every 7-10 days.
• Coco Coir or Soil systems: Flush the medium every 1-2 weeks with plain water.
•  Apply Pythoff for root problems such as root browning or fungus gnat infestations

TopWet increases the effectiveness of foliar sprays such as foliar fertilizer, fungicides and pesticides.

• Improves penetration through the leaf’s surface.
• Maximizes leaf surface coverage and reduces waste
• For use with both acid and alkaline sprays.
• Fully biodegradable and 100% non-ionic (25%** polyoxyalkylene polymer)

Only 1-2mls per litre is needed