C02

THE GREEN PAD is an innovative product designed to increase levels of carbon dioxide in your indoor garden, and propagation domes, absorbing your gardens humidity to power its CO2 generating reactions. Using a unique natural combination of carbons and acids that react to humidity to begin a measured release of CO2 THE GREEN PADS, when kept dry in their original packaging, will last well over a year. This allows you to use them only when you need them. THE GREEN PADS are easy to use each Original GREEN PAD is effective in an area of 200 to 400 cubic feet. And the new  Grand Daddy Pad is used in an area of 800+ cubic feet. Adding more GREEN PADS will certainly increase your PPM levels even higher.

When it comes to supplementing your garden with CO2 THE GREEN PAD may be one of the most inexpensive and innovative ways to get the good gas to your plants. CO2 equipment can get expensive and The Green Pads were designed to produce enough CO2 to be of significant benefit to the indoor home garden without the upfront expense of equipment but with similar results.

THE GREEN PAD is a sheet/pad type material laminated with layers of natural carbons and acids that hangs inside your grow room, tent or garden and absorbs the rooms humidity (35%+) to power its reactions, releasing carbon dioxide. If you add periodic water misting, it will accelerate that activation.

• Each full sized GREEN PAD lasts about 2 weeks, they peak at the end of the first week, and new Green Pad’s get rotated in weekly
• To maintain higher PPM’s you would want to use 1-2 GREEN PADS per 200 to 400 cubic feet of space. Of course adding more of THE GREEN PADS will certainly increase your PPM’s too. You may add or subtract as many GP’s as you need for your specific area.

FOR ALL YOU CURRENT GROWER USING CO2 TANKS: Don’t Get Yourself in a Situation Where You’ve Run Out of CO2!

THE GREEN PAD is your backup for those using CO2 tanks that run empty. Keep an extra pack on hand for emergencies or when you can’t get out to get a tank refill.

You can open THE GREEN PADS and use them when they need them, in the original package. They will last at least a year. Don’t get caught with a garden where you have depleted CO2 that your plants have become accustomed to. Drop a few GREEN PADS in the meantime!

NOW CHECK OUT THE GREEN PAD JR. for Your Cuttings!

CO2 accelerates the natural rooting process for cuttings and seedlings so they can establish healthy roots and more nodes by feeding the leaves.

THE GREEN PAD JR gives you higher strike rates, less leaf yellowing, faster rooting by 2-3 days or more allowing you to move healthy rooted cuttings and seedlings to veg faster.

THE GREEN PAD JR is placed in the humidity dome and replaced every other day until you are fully rooted or when you remove the dome. Its that easy!

Very inexpensive to have on-hand and if you don't use them immediately, they'll be good to go when you need them for up to a year. Make sure to keep the remaining GREEN PAD JR’s dry in original packaging and they will last over a year.

The Pro-leaf PPM-B1, digital Co2 controller, provides simple and precise control of a 240-volt co2-generating device with modes for both increasing and decreasing co2. Also featuring Fuzzy logic operation which offers additional accuracy when utilizing compressed gas for co2 supplementation. Adjustable set points range from 400-2000 parts per million with an accuracy of +/-100 PPM and an adjustable deadband. A remote sensor, with 4.5m cable, accurately monitors the gardens PPm levels and relays this information to the controller for display in real-time. An integrated photocell allows for day, night, or continuous operation and the unit records maximum and minimum values for later viewing.

Why Add CO2?

• Plants use CO2 for photosynthesis (sugar production).
• If CO2 is restricted, so is sugar production.
• Plants can handle 1000 - 1200ppm of CO2. There's only around 400 - 450ppm in the air. Bringing that up to the optimum 1200ppm is one of the easiest ways to ramp up sugar production and increases your yield by up to 20%!
• In summer, extra CO2 and also helps plants with heat stress by photosynthesising more!

SPECIFICATIONS

• Max Current: 10 amps
• Sensor Cord Length: 4.5m (15')
• Control Range: 400ppm to 2000ppm
• CO2 Accuracy: 100ppm
• Weight: 1kg (2.2 lb)

The Pro-Leaf Multi-Function Environmental Controller, BECC-B2, offers full control of the indoor garden environmental, with four 240-volt receptacles for cooling, humidity, Co2 and heating devices. This advanced unit precisely monitors and manages co2 in a range of 400-2000 parts per million with an adjustable deadband. Featuring fuzzy-logic technology to provide even greater control in compressed co2 setups. The BECC-B2 regulates temperature in a control range of 5-50 degrees centigrade, and relative humidity in a range of 5-95 per cent, both with adjustable deadbands. Photocell control allows for separate day and night settings of temperature and humidity. The BECC-B2 includes a remote sensor on a 4.5m cable with integrated photocell.